Getting Ready
Turning On the Projector
Before performing any of the operations in this section, make sure you first set up the projector (page 28) and connect to an output device (pages 34 to 37).
AC Power Cord Precautions
zMake sure that you use a power source with the same voltage as that specified for the projector.
zDo not share the outlet supplying power to the projector with other devices. If you are using an extension cord, make sure that the ampere rating of the extension cord is compatible with the power consumption value of this projector.
zNever use the power cord while it is still bundled together.
zNever place objects on top of the power cord and do not step on it.
zNever pull on the power cord. When unplugging it, grasp the plug.
zUse a conveniently located power outlet that you can reach easily when you need to unplug the projector.
zIf you need more information about the power supply, contact your original dealer or authorized CASIO service center.
To turn on the projector
1. Use the bundled AC power cord to plug the projector into a power outlet.
Power supply connector
Bundled AC power cord
The shape of the plug depends on your geographical area.
zPlugging into a power outlet causes the three indicators on the top of the projector to light amber. After a short while, two of the indicators will go out and only the POWER/ STANDBY indicator will remain lit amber, which indicates the standby state.
zNote that the projector will not turn on if you press the [
] (power) key while all three indicators are lit amber. Wait until the projector is in the standby state before trying to turn it on.
2.Turn on the computer or video device that is connected to the projector.
38