Using the Setup Menu

Setting Screen Type Sub-menu Item

This type of sub-menu item displays a separate screen that you use to configure its settings. Examples: Image Adjustment J Gamma Mode; Option Settings J Language, etc. Operation: The following example shows how to configure settings for Input Settings J

Video Signal, S-Video Signal

1. On the remote controller, press the [VIDEO] key to select the VIDEO input terminal as the input source.

2. Perform steps 2 through 4 under “Basic Setup Menu Operations” on page 65. On the “Input Settings” main menu, select the “Video Signal” sub-menu item.

3. Press the [ENTER] key.

zThis displays the video signal selection screen shown below.

4. Use the [S] and [T] keys to highlight the item you want to select, and then press the [ENTER] key.

5. After you are finished configuring the settings, press the [ESC] key to close the setting screen and return to the sub-menu screen.

zAfter you are finished, press the [MENU] key to exit the setup menu.

68