Projection Operations

zThe allowable ranges for manual keystone correction are –30 to +30 degrees vertically, and –8 to +8 degrees horizontally.

zPerforming horizontal keystone correction and then vertical keystone correction can cause the horizontal keystone correction value to change. This occurs when vertical keystone correction narrows the allowable manual horizontal keystone correction range, causing the horizontal keystone correction value to be outside the correction range.

If this happens, rearrange the projector and screen so the lens is pointing straighter at the screen, and then perform manual keystone correction or auto keystone correction again.

Adjusting the Volume Level (VOL +/–)

You can use the remote controller keys to adjust the volume level of the audio that is output from the projector’s speaker.

To adjust the volume level

1. On the remote controller, press the [VOL +] or [VOL –] key.

zThis causes the [Volume] screen to appear on the projected image.

2. Press the [VOL +] key or the [X] key to increase the volume, or the [VOL –] or [W] key to lower the volume.

3. After the setting is the way you want, press the [ESC] key.

zThis causes the [Volume] screen to disappear.

53