Using the Setup Menu

■Input Settings J Video Signal, S-Video Signal

This sub-menu specifies the input signal for the projector’s VIDEO and S-VIDEO input terminals.

Input Source Specific Menu Items

Input Source

Available Items (Parentheses indicate defaults.)

 

 

RGB

None

 

 

Component

 

 

 

S-VIDEO

(Auto), NTSC, NTSC4.43, PAL, PAL-M, PAL-N, PAL60, SECAM

 

 

VIDEO

 

 

 

No Signal

(Auto), NTSC, NTSC4.43, PAL, PAL-M, PAL-N, PAL60, SECAM

 

* Only when the currently selected input source is VIDEO or

 

S-VIDEO.

 

 

Setting Explanations

Auto:

Select this setting to have the projector switch the video signal system

 

automatically in accordance with the input signal from the video device

 

that is connected to the VIDEO or S-VIDEO input terminal. This is the

 

setting you should normally use.

Other settings: Each setting selects the applicable video system. Use these settings when you want to specify only one specific video signal for the VIDEO and S-VIDEO input terminals.

Setting Storage

This setting is saved for the VIDEO and S-VIDEO input terminals only.

86