Projection Operations

Manual Keystone Correction

Manual keystone correction can be used to correct for both vertical and horizontal keystoning.

To use manual keystone correction

1. Press the [KEYSTONE] key.

zThis causes the keystone correction screen to appear on the projected image.

2. Use the [S] and [T] keys to select either “Vertical Keystone Correction” or “Horizontal Keystone Correction”.

3. Use the [W] and [X] keys to correct for keystoning.

zEach press of [W] or [X] shifts the indicator on the currently selected bar left or right.

zKeystone correction is possible within the range that the indicator is able to move within the selected bar. Depending on conditions, the indicator may not move all the way to either end of the bar.

zRepeat steps 2 and 3 to perform keystone correction for the other direction, if you want.

4.After the settings are the way you want, press the [ESC] key or the [KEYSTONE] key.

zThis causes the keystone correction screen to disappear.

52