
Projection Operations
To display the sub-window1. On the remote controller, press the [RGB/COMPONENT] key to select RGB as the input source.
zYou can also select the input source using the projector’s [INPUT] key.
2.On the remote controller, press the [P-IN-P] key to display the sub- window.
zThis causes the sub-window, containing the image input through the VIDEO or S-VIDEO terminal, to appear on the projected image. The sub-window will be located at the position that was used the last time a sub-window was displayed. The initial default location is the lower right corner.
zYou can leave the sub-window where it is, or move it to another location within the projected image. See “To change the location of the sub-window” for more information.
zYou can also select one of three sizes for the sub-window. See “To change the size of the sub-window” for more information.
3.To close the sub-window, press the remote controller’s [P-IN-P] key or the [ESC] key.
To change the location of the sub-windowWhile a sub-window is displayed, use the remote controller’s cursor keys to move it to one of the nine locations shown below.