Using the Setup Menu

This section explains how to configure setup menu settings, and provides details about each of the settings.

Setup Menu Overview

Pressing the [MENU] key while an image is being projected displays the setup menu on the projected image. The setup menu can be used to configure a variety of different projector settings. See the “Setup Menu Setting List” on page 62 for details about the settings that are available.

Using the Setup Menu Setting List

zThe settings that can be configured and the settings that appear on the item depend on the input source that is currently selected. Under “Input Source” in the following list, there

is a column for each of the input sources listed below. A “ ” in a column means that the menu item to the left is displayed for that input source, while “” indicates that the menu item is not displayed.

Column name:

Input source:

 

 

R

RGB

 

 

C

Component

 

 

S

S-VIDEO

 

 

V

VIDEO

 

 

No Signal

No signal being input

 

 

zThe “Sub-menu Item Type” column shows the type of the applicable sub-menu item. Refer

to the pages noted below for more information about each item type. Value Setting: Specifies a numeric value () page 67).

Selection: Allows selection from multiple options () page 67).

Setting Screen: Numeric value specification or option selection on a separate setting screen

 

() page 68).

Execution:

Initializes a setting () page 69).

Information:

Displays information only () page 69).

zThe “See page” column shows where you should go for more information.

61