Using the Setup Menu

zBesides the menu operation explained above, the following operations can also be used to turn off key lock.

zWhile the projector is on: Hold down the projector’s [ESC] key for about five seconds.

zWhile the projector is off: Simultaneously hold down the projector’s [ESC] and [ ] (power) keys for about five seconds. This turns on the

projector and also turns off key lock.

zYou can use the above projector operations to turn off key lock if the remote controller batteries unexpectedly go dead, etc.

■Option Settings J Custom Logo Settings

With this sub-menu, you can cut part of the projected screen and use it to create an original logo, which you can display for the startup screen, the no signal screen, and the mute screen. An original logo that you create is called a “custom logo”. The custom logo settings let you create a custom logo, view your custom logo, and perform other operations.

zCustom logo settings cannot be configured when there is no input signal.

zA single custom logo is stored, which is applied to all input sources.

Capturing a Custom Logo Image

You can create a custom logo by capturing part of an image that is currently being projected by the projector.

zThe display size and position of a custom logo created by capturing an image depend on the configuration of the following settings when you capture the image: Logo Vertical, Logo Horizontal, Custom Logo Zoom, Background Color, and Resolution. Make sure that you configure these settings the way you want before performing the image capture operation. For details of these operations, see “Configuring Custom Logo Capture Settings” on page 95.

92