Using the Setup Menu

Input Settings J Special Signal

When a computer is connected to the RGB input terminal, the projector automatically detects the type of RGB signal being sent from the computer and projects the image. Some signals, however, cannot be detected properly by the projector. When auto detection is not possible for some reason, try using this setting for a computer signal with a resolution of SXGA (1280 1024) or SXGA+ (1400 1050).

Input Source Specific Menu Items

Input Source

Available Items (Parentheses indicate defaults.)

 

 

RGB

(1280 1024), 1400 1050

 

 

Component

None

 

 

S-VIDEO

 

 

 

VIDEO

 

 

 

No Signal

* Only when the currently selected input source is RGB.

Setting Explanations

1280 1024: Specifies an SXGA (1280 1024) resolution RGB signal.

1400 1050: Specifies an SXGA+ (1400 1050) resolution RGB signal.

Setting Storage

This setting is saved for the RGB input terminal only.

Input Settings J Restore Menu Defaults

This sub-menu returns all of the sub-menu items on the Input Settings main menu to their initial default settings.

zYou can perform initialization even when there is no input signal. In this case, the initialization is performed for the currently selected input source.

zBasically, initialization initializes the settings of the current input source. Note, however, that the signal name indicator setting is always initialized, regardless of the currently selected input source.

zFor details about the initialization procedure, see “To initialize the settings of a particular main menu item” on page 70.

88