Getting Started
Setting Up the FaxPress Premier Analog
IMPORTANT! Before beginning the steps described in this section, make sure you’ve carefully reviewed the Required Setup Procedures on page
Premier Analog Requirements
The FaxPress Premier Analog requires:
•that each fax channel be connected to a dedicated phone line. The Premier Analog may have 8, 12, or 16 fax channels.
Note: When connecting the FaxPress Premier Server through a PBX,
it is required that a trained PBX technician be on site.
•that you know the input string of DTMF digits from the PBX to the FaxPress Premier Analog fax lines, if the Premier is connected behind a PBX and automatic inbound routing will be used. A mask will need to be configured for FaxPress Premier Analog to recognize the input string. See Automatic Routing in the Administrator’s Guide for detailed information on integrating the Premier with your PBX system.
•a third party device like the Exacom DID Interface Module if you’re using a DID trunk without a PBX system. See Automatic Routing in the Administrator’s Guide for detailed DID information.
Connecting the Premier Analog to your Network
To connect the Premier server to your network, follow these steps:
1.Connect the network cable to the Premier server’s Ethernet port.
2.Connect the fax lines to the FaxPress Premier’s fax modem ports. (See the next section, Attaching the Premier Analog to your Fax Lines.)
12
