Chariot Carriers Chariot Baby Seat manual Securing the safety belts, Please note

2.2.3.4 Securing the safety belts

Loosen the fastex buckles on the padded shoulder harness on the backrest of the trailer seat and take it off.

Insert the fastex buckles from the front through the lower or upper slots in the baby seat, depending on the size of the child,…

...and reconnect both buckles behind the seat. The two fastex buckles on the backrest should be in the lowest position.

The shoulder harness and crotch straps can now be connected by closing the fastex fastener on the front of the baby seat.

For side-fitting, use the two outer fastener units, and, for centre-fitting, the two in the centre.

The shoulder padding can be turned over at the top so that the shoulder strap can be sufficiently shortened.

If necessary, the lower con- necting strap of the shoulder padding can also be unstrapped and the shoulder padding turned over there as well.

For all other children, the shoulder strap can be drawn through the upper flaps of the padding to prevent the padding being able to slip to the side.

Fitted baby seat ready to use in the centre and side position:

Please note:

Never transport your children without the safety belts being properly and fully adjusted, otherwise your child could be seriously or even fatally injured in the event of an accident!

51