![](/images/new-backgrounds/1312085/31208587x1.webp)
2.2 Securing the Baby Seat
2.2.1 Securing on the Comfort and Cheetah2 models
First connect the fastex buckles on the underside of the baby seat with their counterparts on the lap belt ends.
For
For fitting in the centre, use the central belt ends of both lap belts.
Experience has shown that it helps if more or less the following overall belt length adjustment is made (measured from the point of attachment to the baby seat to the point of attachment to the trailer seat):
On the Comfort model - approximately 12 cm
On the Cabriolet and Cheetah2 models - 15 to 16 cm
Correct positioning of the baby seat.
Illustration A
Now lay both straps that are at the front end of the baby seat around the fitted telescopic tube, thread the ends through the fasteners, as in the top right hand picture, and pull the straps tight.
The next step is to connect the safety belts in the trailer with the baby seat:
Insert the trailer seat crotch harness from the rear through the slot in the baby seat in front of the flap for the padding.
Insert the ring through the elastic loop at the end of the flap for the padding.
For side fitting, the crotch harness of the seat part of the relevant side can be used. For
44