First pull one of the two straps at the front end of the baby seat through the corresponding
Illustration A
Thread the end of the strap as shown in the above illustration through the fastener in the baby seat and gently pull the strap tight.
Fit the second strap in exactly the same fashion. Now pull both straps tight so that the baby seat is positioned cen- trally.
The next step is to connect the safety belts in the trailer with the baby seat:
Insert the trailer seat crotch harness from the rear through the slot in the baby seat in front of the flap for the padding.
Insert the ring through the elastic loop at the end of the flap for the padding.
Insert the shoulder harness that is on the appropriate side of the baby seat through the lower or upper slot of the baby seat, depending on the size of the child.
Working towards the rear, insert the shoulder harness through the ring of the lap belt and the corresponding slot on the other side of the baby seat.
Connect the insert of the fastex buckle with its unit on the backrest of the trailer seat. (The fastex buckle should be in its lowest position.)
We recommend folding the basic unit slightly for the next step, so as to slacken off the fabric cover.
Now lay both the straps that are at the top end of the baby seat around the top crossbar inside the trailer.
Pull both straps as in illustration A through the two fasteners at the rear of the baby seat and pull them gently.
We recommend not pulling the straps too tight, otherwise once you fold the unit out again the baby seat will be under too much tension.
53
