Loosen the fastex buckles on the padded shoulder harness on the backrest of the trailer seat and take it off.
Insert the fastex buckles from the front through the lower or upper slots in the baby seat, depending on the size of the child,…
...and reconnect both buckles behind the seat. The two fastex buckles on the backrest should be in the lowest position.
The shoulder harness and crotch straps can now be connected by closing the fastex fastener on the front of the baby seat.
For
The shoulder padding can be turned over at the top so that the shoulder strap can be sufficiently shortened.
If necessary, the lower con- necting strap of the shoulder padding can also be unstrapped and the shoulder padding turned over there as well.
For all other children, the shoulder strap can be drawn through the upper flaps of the padding to prevent the padding being able to slip to the side.
For CX2 and Cougar2 models, we recommend folding the basic unit slightly for this step, so as to slacken off the fabric cover. Do not pull the straps too tight, otherwise once you fold the unit out again the baby seat will be under too much tension.
Illustration A
Now lay both the straps that are at the top end of the baby seat around the top crossbar inside the trailer.
Thread the strap through as illustrated…
…and pull the strap gently.
47
