![](/images/new-backgrounds/1312085/312085111x1.webp)
We recommend folding the basic unit slightly for the next step, so as to slacken off the fabric cover.
Now lay both the straps that are at the top end of the baby seat around the top crossbar inside the trailer.
Illustration A
Thread the end of the strap as shown in the above illustration through the fastener in the baby seat and gently pull the strap tight.
We recommend not pulling the straps too tight, otherwise once you fold the unit out again the baby seat will be under too much tension.
Finally pull all fastening straps tight. (Once you have opened out the trailer body again.)
If you want to adjust the seat to a flatter position, loosen both of the top fastening straps and pull the other four straps tight. If you want an adjustment of greater incline, the procedure is the same but reversed.
Please note: Make sure you check all belt buckles are tight. |
| |
|
| Please note: |
|
| |
|
| Never transport your |
|
| children without the safety |
|
| belts being properly and |
|
| fully adjusted, otherwise |
|
| your child could be |
|
| seriously or even fatally injured |
| Fully fitted baby seat. | in the event of an accident! |
56