Chariot Carriers Chariot Baby Seat manual Please note, Front view

Please note:

Always screw on the telescopic tube to the side of the frame tube that is opposite the threaded bush, in other words from the inside of the vehicle. This results in the threaded bush being pulled into the frame tube hole, meaning that it cannot work loose.

Fitted telescopic tube, shown from the front.

Fitted telescopic tube, shown from inside the trailer.

2.1.2 Refitting the fastex buckles for centre-fitting of the baby seat

Note: The baby seat can be either fitted to one side or in the centre. This step should only be carried out if you want to fit the baby seat in the centre.

For centre-fitting the fastex buckles on the two ends of the lap belts need to be swapped round.

After swapping them round, thread the fastex buckles as shown in the illustration.

Arrangement of fastex buckles needed for centre-fitting of the baby seat

Front view.

43