1. Undoing the Baby Seat Securing Straps
On delivery, the four baby seat securing straps are threaded through the relevant fasteners. When secu- ring the seat they have to be pulled out of the fasteners.
Securing strap threaded through To pull out | Final position |
2.Fitting to Two Seater Chariot Trailers
2.1Preliminary steps
2.1.1 Fitting the Telescopic Tube
The telescopic tube is secured at the front to the side frame tubes.
In the forward side frame tubes there are holes with threaded bushes for fitting the telescopic tube.
There are already screws inserted in the threaded bushes for securing the telescopic tube to the Chariot CTS two seaters.
Please use only these screws –
the screws which you might find supplied with the baby seats are no longer required and do not fit.
Please note: These are imperial thread size screws (in inches), so standard metric thread screws are not suitable as replacements.
Locate the aluminium profile of the telescopic tube behind the side tube of the basic unit (in other words to the inside, facing the passenger compartment) and align the holes of the frame tube and aluminium profile.
Make sure that you insert the screw exactly perpendicular to the frame tube so that it properly engages the threa- ded bush.
Screw in using a suitable scre- wdriver, but do not tighten.
Then screw in the screw on the other side. Only then should you tighten both screws.
42
