Chicago Electric 95629, 95424 manual See , above right See , above left

ASSEMBLY INSTRUCTIONS (CONTINUED)

Stationary Mobile

2.

2.

Install the Back Wheels (37A) at the Axle (36A). Install the Back Wheels (37A) at the Axle (36A).

3. 3.

Fix the Back Wheels(37A) with the	Fix the Back Wheels (37A) with the
Clips (38A).	Clips (38A).
4.	4.
	Arm (5A)

Washer and Bolt

Set the Axle (36A) with the Back Wheels		Set Arm (5A) against the top back of the
(37A) attached against the bottom of the		welder case. Screw the Bolts through
case. Then, screw the Bolts through the		Washers and into the welder case.
Washers and into the bottom of the case.		(See Figure 4, above right.)
(See Figure 4, above left.)		Set the Support (35A) against the bot-
		tom back of the case. Align the holes and
		screw the Bolts through the Washers and
		into the case.
		Set the Axle (36A) with the Back Wheels
		(37A) against the bottom of the Support
		(35A). Screw the Bolts through the Wash-
		ers and into the Support.
SKU 95424, 95629	For technical questions, please call 1-800-444-3353;		Page 12
	Troubleshooting section at end of manual.