Grounding
NOTE: This Welder requires the installation of a
WARNING!
Improperly connecting the grounding wire can result in risk of electric shock. Check with a qualified electrician if you are in doubt as to whether outlet is prop- erly grounded. Do not modify power cord plug used with tool. Never remove grounding prong from plug. Do not use tool if the power cord or plug is dam- aged. If damaged, have it repaired by a service facility before use. If the plug will not fit the outlet, have a proper outlet installed by a qualified electrician.
GROUNDED TOOLS: TOOLS WITH THREE PRONG PLUGS
1.Tools marked with “Grounding Required” have a three wire cord and three prong grounding plug. The plug must be connected to a properly grounded outlet. If the tool should electrically malfunction or break down, grounding provides a low resistance path to carry electricity away from the user, reducing the risk of electric shock.
2.The grounding prong in the plug is connected through the green wire inside the cord to the grounding system in the tool. The green wire in the cord must be the only wire connected to the tool’s grounding system and must never be attached to an electrically “live” terminal.
3.Your tool must be plugged into an appropriate outlet, properly installed by a certi- fied electrician and grounded in accordance with all codes and ordinances.
Extension Cords
An extension cord must never be used with this item. Use of an extension cord could result in damage to the item or fire.
Symbology
|
|
|
| Double Insulated |
|
|
|
| |
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| Canadian Standards Association |
|
|
|
|
|
|
|
|
| Underwriters Laboratories, Inc. |
|
|
|
|
|
V~ | Volts Alternating Current | |||
| A | Amperes | ||
|
|
|
| |
|
|
|
|
|
SKU 95424, 95629 | For technical questions, please call | Page 10 | |
Troubleshooting section at end of manual. | |||
|
|
