Cisco Systems 12 SP+ manual Defaults Configuration section on, 42-15

Chapter 42 Cisco IP Phone Configuration

	Configuring Cisco IP Phones
Table 42-1 Phone Configuration Settings (continued)
Field	Description
Phone Button	Choose the appropriate phone button template. The
Template	phone button template determines the configuration of
	buttons on a phone and identifies which feature (line,
	speed dial, and so on) is used for each button.
	The value you enter overrides the default value for this
	type of device. Refer to the “Device Defaults
	Configuration” section on page 6-1.
	Cisco CallManager does not make this field available for
	H.323 clients or CTI ports.
Expansion Module 1	Choose the appropriate template, if your phone is
	connected to a Cisco IP Phone 7914 Expansion Module.
Expansion Module 2	Choose the appropriate template, if your phone is
	connected to a second Cisco IP Phone 7914 Expansion
	Module.
Phone Load Name	Enter the custom software for the Cisco IP Phone.
	The value you enter overrides the default value for the
	current model. For more information, see the “Device
	Defaults Configuration” section on page 6-1.
	This field is not available for H.323 clients or CTI ports.
Module 1 Load	Enter the custom software for the Cisco IP Phone 7914
Name	Expansion Module, if applicable.
	The value you enter overrides the default value for the
	current model.
Module 2 Load	Enter the custom software for the second
Name	Cisco IP Phone 7914 Expansion Module, if applicable.
	The value you enter overrides the default value for the
	current model.

	Cisco CallManager Administration Guide
78-13310-01		42-15