Cisco Systems 2800 instruction

Warning

Warning

Warning

Warning

Before working on a system that has an on/off switch, turn OFF the power and unplug the power cord. Statement 1

Read the installation instructions before connecting the system to the power source. Statement 1004

This unit is intended for installation in restricted access areas. A restricted access area can be accessed only through the use of a special tool, lock and key, or other means of security. Statement 1017

Blank faceplates and cover panels serve three important functions: they prevent exposure to hazardous voltages and currents inside the chassis; they contain electromagnetic interference (EMI) that might disrupt other equipment; and they direct the flow of cooling air through the chassis. Do not operate the system unless all cards, faceplates, front covers, and rear covers are in place. Statement 1029

11

Image 11

Cisco Systems 2800 manual

Contents

Including License and Warranty Replacement, Repair, or Refund Policy for Hardware Cisco 90-Day Limited Hardware Warranty TermsDuration of Hardware Warranty Overview To Receive a Return Materials Authorization RMA Number Serial Number Label Location for Cisco 2801 Router Product Serial Number Location Translated Versions Documents, Equipment, and ToolsUser Documentation Items Included with Cisco 2801 Routers Items Not Included Install ChassisSafety Information Page OBS! Spara Dessa Anvisningar Guarde Estas Instruções GEM Disse Anvisninger Page Statement Installing the Router Attaching Brackets to the Router for Rack-Mounting Rack-Mounting the Router Bracket Installation for Front Mounting Installing the Router in a Rack Attaching Brackets to the Router for Wall Mounting Wall-Mounting the Router-Cisco 2811 Routers Only Ground during normal use. Statement Installing the Router on a DesktopGrounding the Chassis Chassis Ground Connection on Cisco 2801 Chassis Connect Cables 120 VAC, 15 a 240 VAC, 10 A. Statement Power ConnectionsConnecting the Router to AC Power Protective device is rated not greater than Use copper conductors only. Statement Connecting the Router to DC PowerSize Wire Terminal Lug Protection 60 VDC, 20 A. Statement Be connected first and disconnected last. Statement TipInsulation and conductor. Statement Step Electrical hazards. Statement DC Wire Routing and Attachment for Cisco 2811 Routers Connecting to One Source Only-Source a or Source B Source a and Source B Wired with Opposite-Polarity Grounds WAN, LAN, and Voice Connections Connecting the Router to Backup Power T1/E1 WAN Port or Connection Port Type, Color Cable Port Color Connection Cable Power Up the RouterChecklist for Power-Up System Management Connections Power-Up Procedure LED Label LED Color or State Meaning Verify the Hardware ConfigurationInterface Numbering Verify the Front Panel LED Indications Port Location Interface Numbering Scheme Examples1 Slot Type Interface Numbering Range Perform Initial Configuration Initial Configuration Using the Setup Command Facility Summary of the available interfaces appears User prompt appears To access documentation using Cisco Connection Online CCO Where to Go NextVerify the Initial Configuration To access documentation on Cisco.com Ordering Documentation Obtaining DocumentationCisco.com Product Documentation DVD Cisco Product Security Overview Reporting Security Problems in Cisco ProductsDocumentation Feedback Cisco Technical Support & Documentation Website Submitting a Service RequestDefinitions of Service Request Severity Obtaining Technical Assistance Obtaining Additional Publications and Information Page Page Page Page USA