Cisco Systems 7937G Answering a Call, Ending a Call, Using Hold and Resume, If you want to

Answering a Call

You can answer a call by simply pressing the Off-hook button, or you can use other options if they are available on the conference station.

If you want to...	Then...	For more information, see...
Switch from a connected	Press Answer	Using Hold and Resume,
call to answer a new call		page 17
Answer a call on hold	Highlight the appropriate call, and then	Using Hold and Resume,
	press Resume	page 17
Send a call to your voice	Press iDivert	Accessing Voice Messages,
messaging system		page 36
Auto-connect calls	Use AutoAnswer	Using AutoAnswer, page 28
Retrieve a parked call on	Use Call Park	Storing and Retrieving Parked
another conference		Calls, page 25
station
Use the conference station	Use Call Pickup	Picking Up a Redirected Call
to answer a call ringing		on Your Conference Station,
elsewhere		page 24

Ending a Call

There are two ways to end a call.

If you want to...	Then...
Hang up your current call	Press	or EndCall.
Hang up one call, but preserve another	Press EndCall. If necessary, remove the call from hold first.
call on the same line

Using Hold and Resume

You can hold and resume calls.

If you want to...	...Then
Put a call on hold	1.	Make sure the call you want to put on hold is highlighted.
	2.	Press Hold.
Remove a call from hold	1.	Make sure the appropriate call is highlighted.
	2.	Press Resume.

Cisco Unified IP Conference Station 7937G Phone Guide for Cisco Unified Communications Manager 6.0 17