Cisco Systems 7937G warranty Audible Message Waiting Indicator Policy drop-down list

If you want to...	Then do this after you log in...
Change the audible	1. Choose User Options > Device.
message indicator	2.	If you have more than one device, select a device.
setting
	3.	Click Line Settings.
	4.	In the Audible Message Waiting Indicator area, choose a policy from
		the Audible Message Waiting Indicator Policy drop-down list.
		If you turn the message indicator on, and you have a new voice
		message, you will hear a stutter dial tone when you place a call.
	5.	Click Save.
Change the ring type	1. Choose User Options > Device.
	2.	If you have more than one device, select a device.
	3.	Click Line Settings.
	4.	In the Ring Settings area, choose a setting to tell the conference station
		how to indicate an incoming call.
	5.	Click Save.
	Note The “idle” ring setting pertains if you receive an incoming call when the
		conference station is idle. The “consecutive” ring setting pertains if you
		receive an incoming call when the conference station is active.
Update the text (line	1. Choose User Options > Device.
text label) that displays	2.	If you have more than one device, select a device.
on the called party’s
	3.	Click Line Settings.
conference station that
identifies your	4.	In the Line Text Label area, enter the text that will identify your
directory number.		directory number when you call another conference station.
	Note If you do not specify a line text label, your directory number will
		display on the called party’s conference station.

5.Click Save.

Note The conference station uses the ASCII Label field if the conference station does not support double-byte character sets.

Cisco Unified IP Conference Station 7937G Phone Guide for Cisco Unified Communications Manager 6.0 45