Cisco Systems 805 manual Connecting the Power Supply

Connecting the Power Supply

Connecting the Power Supply

Follow the steps in Figure 2-7 to connect the power supply.

Warning The device is designed to work with TN power systems.

Warning This product relies on the building’s installation for short-circuit (overcurrent) protection. Ensure that a fuse or circuit breaker no larger than

120 VAC, 15A U.S. (240 VAC, 16A international) is used on the phase conductors (all current-carrying conductors).

Warning This equipment is intended to be grounded. Ensure that the host is connected to earth ground during normal use.

Figure 2-6 Connecting the Power Supply

1. Press power switch	Cisco 805 router
to STANDBY ( ).

HUB	ETHERNET
NO HUB
LINK		CONSOLE
	10	BASE T3

2.Connect power supply cable.

Cisco 805

SERIAL

5. Press power switch to ON ( ).

Desktop power supply

3.Connect power cord to power supply.

4.Connect other end of power cord to electrical outlet.

17288

Installing the Cisco 805 Router 2-13