Cisco Systems AIRCAP3602IAK9 manual Cisco 3600 Series Routers hardware configuration note

Appendix A Troubleshooting

Error Messages

Table A-10 Cisco 3660 System Error and Status Messages (continued)

LED Type	LED Color	Message
PS1, PS2,	Amber	Error:
LED on		%PS-3-DCOUTPUTVOLTFAIL: System detected Power System # DC FAIL condition.
power
		Explanation:
supply rear
panel		The cable connected to the specified DC power supply (1 or 2) is loose or the DC power supply
		has failed.
		Recovery:
		1.	Check the power supply LEDs to identify the faulty unit.
		2.	Power off the faulty power supply and circuit breaker.
		3.	Check that cables are seated properly and terminal blocks are wired correctly.
		4.	Power on the circuit breaker and the power supply.
		5.	If the error condition persists, replace the DC power supply. Refer to the Installing
			Universal DC Power Supplies in Cisco 3660 Routers or to the Installing Power Supplies
			in Cisco 3600 Series Routers hardware configuration note.
		When the error condition is resolved, the following informational message appears:
		%PS-3-DCOUTPUTVOLTOK: Power System DC condition is now normal.
PS1, PS2,	Amber	Error:
LED on		%PS-3-INPUTVOLTFAIL: System detected Power System # AC FAIL condition.
power
		Explanation:
supply rear
panel		The cable connected to the specified AC power supply (1 or 2) is loose or the AC power supply
		has failed.
		Recovery:
		1.	Check the power supply LEDs to identify the faulty unit.
		2.	Power off the faulty power supply.
		3.	Check that cables are seated properly and terminal blocks are wired correctly.
		4.	Power on the power supply.
		5.	If the error condition persists, replace the AC power supply. Refer to the Installing Power
			Supplies in Cisco 3600 Series Routers hardware configuration note.
		When the error condition is resolved, the following informational message appears:
		%PS-3-INPUTVOLTOK: Power System AC condition is now normal.

Cisco 3600 Series Routers Hardware Installation Guide

A-14 OL-2056-05