Cisco Systems AIRCAP3602IAK9 manual PS1, PS2 Amber

Appendix A Troubleshooting

Error Messages

Table A-10 Cisco 3660 System Error and Status Messages (continued)

LED Type	LED Color	Message
System	Amber	Error:
		%PS-3-MULTFAIL: There is more than one failure with the Power System #; please
PS1, PS2,	Amber	resolve problems immediately.
		Explanation:
LED on
power		The specified power supply (1 or 2) has experienced multiple failures. This is a critical
supply rear		condition that must be resolved immediately.
panel		Recovery:
		1. Check the power supply LEDs to identify the faulty unit.
		2. Power off the faulty power supply and circuit breaker (for a DC power supply).
		3. Check that cables are seated properly and terminal blocks are wired correctly.
		4. Power on the circuit breaker (for a DC power supply), and the power supply.
		5. If the error condition persists, replace the power supply. Refer to the Installing Universal
		DC Power Supplies in Cisco 3660 Routers or to the Installing Power Supplies in
		Cisco 3600 Series Routers hardware configuration note.
		When the error condition is resolved, the following informational message appears:
		%PS-3-PSOK: Power System is now normal.
—	—	Error:
		%FAN-3-FAN_FAILED: Fan # had a rotation error reported.
		Explanation:
		The specified fan (1 through 6) is not rotating at the desired speed.
		Recovery:
		Replace the fan cage. Refer to the Replacing the Fan Cage in Cisco 3660 Routers hardware
		configuration note.
		When the error condition is resolved, the following informational message appears:
		%FAN-3-FAN_OK: Fan # had earlier reported a rotation error. It is ok now.
—	—	Error:
		%OIR-6-REMCARD: Card removed from slot x, interfaces disabled.
		Explanation:
		The online-insertion-and-removal (OIR) function detected the removal of a network module
		processor from the specified chassis slot (1 through 6). The interfaces on that processor are
		administratively shut down and removed. In addition, the routing table is flushed of any routes
		through the removed interfaces.
		For more information, refer to the Cisco Network Modules Hardware Installation Guide.
		This is an informational message that does not require any recovery procedure.

Cisco 3600 Series Routers Hardware Installation Guide

OL-2056-05 A-15