Cisco Systems AIRCAP3602IAK9 manual Bit Address net host, Baud Bit

Appendix C Configuration Register

Configuring the Boot Field

Table C-3 Configuration Register Settings for Broadcast Address Destination

Bit 10	Bit 14	Address (<net> <host>)
Off	Off	<ones> <ones>
On	Off	<zeros> <zeros>
On	On	<net> <zeros>
Off	On	<net> <ones>

Bit 13 determines the router’s response to a bootload failure. Setting bit 13 causes the router to load operating software from ROM after six unsuccessful attempts to load a boot file. Clearing bit 13 causes the router to continue indefinitely to attempt loading a boot file. By factory default, bit 13 is set to 0.

Bits 5, 11, and 12 of the configuration register determine the baud rate of the console terminal. Table C-4shows the bit settings for the eight available rates. (The default baud rate is 9600 bps.)

Table C-4 Console Terminal Baud Rate Settings

Baud	Bit 5	Bit 12	Bit 11
115200	1	1	1
57600	1	1	0
38400	1	0	1
19200	1	0	0
9600	0	0	0
4800	0	0	1
2400	0	1	1
1200	0	1	0

Cisco 3600 Series Routers Hardware Installation Guide

OL-2056-05 C-5