![](/images/new-backgrounds/1151342/151342185x1.webp)
Chapter 3 Installing the Router
Connecting to a Console Terminal or Modem
Figure |
|
1 | 2 |
1 | 2 |
|
| FDX | 1 |
FDX | LINK | 0 |
100Mbps |
| |
LINK |
|
|
100Mbps |
|
|
VCC OK |
| 1 |
SYSTEM | FDX | 0 |
FDX | LINK | |
100Mbps |
| |
LINK |
|
|
100Mbps |
|
|
VCC OK |
|
|
SYSTEM |
|
|
8277482417
1
LAN, WAN, and voice cables
2
Power wires
Connecting to a Console Terminal or Modem
Your router has asynchronous serial console and auxiliary ports. These ports provide administrative access to your router either locally (with a console terminal or PC) or remotely (with a modem).
Cisco provides the following cables and adapters for connecting your router to a console terminal, PC, or modem:
•One console adapter cable
•One modem adapter cable
This section describes how to connect a console terminal or PC to the console port, and how to connect a modem to the auxiliary port. It contains the following sections:
•Connecting to the Console Port, page
•Connecting to the Auxiliary Port, page
•Identifying a Rollover Cable, page
Note For information on identifying rollover cables, refer to the “Identifying a Rollover Cable” section on page
Cisco 3600 Series Routers Hardware Installation Guide
|
| ||
|
|