-10
Cisco AS5350 Universal Gateway Chassis Installation Guide
78-10754-03 0A
Appendix
Installing the Power Supply
Installing the Power Supply
To install the power supply, follow this procedure:
Step 1 Place the power supply as shown in Figur e B-11, then slide it toward the rear p an el. You will be able to
feel the chassis hooks engage with the slots on the bottom of the power supply. The same procedure
applies to both th e AC a nd D C power supplies.
Figure B-11 Inserting the Power Supply in the Chassis
Step 2 Connect the two power connectors to the system board and backplane. (See Figure B-8.) Connect the
system board c o n ne ctor first, followe d by the backpla ne connector. (See F i gu r e B-12.)
Note The system board co n ne cto r is located on the system b oa rd , be low an d lef t of t he backplane
connector.
Power
supply
35695
3
Chassis bottom
Front panel