-15
Cisco AS5350 Universal Gateway Chassis Installation Guide
78-10754-03 0A
Appendix Replacing the Chassis Cover
b. Insert the +48 VDC return wires into the DC connectors (+) and tighten the lock ing screws. Ensure
that no bare wire is exp o sed .
c. Insert the -48 VDC wires into t he DC n eg ative connectors (-) and ti ghte n the l ocki ng screws. Ensure
that no bare wire is exp o sed .
d. Make sure that the pow er su pp ly w ir es are secured to cable s t ra in -rel ie f clamps with cable tie s.
Warning
After wiring the DC power supply, remove the tape from the circuit breaker switch handle and
reinstate power by moving the handle of the circuit breaker to the ON position. To see translations of
the warnings that appear in this publication, refer to the Regulatory Compliance and Safety
Information document that accompanied this device.
Step 9 Power on the universal gat eway.
The internal power supply fan should power on.