Installation Checklist | Cisco Systems A9014CFD, ASR 9014CFD

Chapter 2 Preparing to Install the Router

Site Planning

–To install or remove modules

–To remove the cover, if you are upgrading memory or other components

•Number 12-24 pan-head screws to secure the router to the equipment rack.

•Cables for connection to the WAN and LAN ports (depending on the configuration).

Note For more information on cable specifications, see Appendix B, “Cable Specifications”

•Ethernet hub or PC with a network interface card for connection to the Ethernet (LAN) ports.

•Console terminal (an ASCII terminal or a PC running terminal emulation software) is configured for 9600 baud, 8 data bits, no parity, and 2 stop bits.

•Console cable for connection to the console port.

•Ratcheting torque screwdriver with a Phillips head that exerts up to 15 pound-force inches (lbf-in) of pressure.

•Crimping tool as specified by the ground lug manufacturer.

•16-AWG copper wire for the power cord.

•Wire-stripping tools for stripping both 6-AWG and 18-AWG wire.

•Serial interfaces may require a channel service unit/data service unit (CSU/DSU).

Installation Checklist

To assist you with your installation and to provide a historical record of completed tasks and users, use the following Installation Checklist. Make a copy of this checklist and mark the entries as you complete each task. When the checklist is completed, include a copy of the checklist for each router in your Site Log along with other records for your new router. See Appendix C, “Site Log” for information on the Site Log, including a sample Site Log.

Installation Checklist for Site:

Router Name:

		Task	Verified by	Date

		Installation Checklist copied

		Background information placed in Site Log

		Site power voltages verified

		Installation site power check completed

		Required tools available

		Additional equipment available

		Router received

		Documentation DVD received (if ordered)

		Cisco Information Packet publication received

		Chassis components verified

		Initial electrical connections established

		Cisco ASR 901 Series Aggregation Services Router Hardware Installation Guide


	OL-23778-01						2-7
	OL-23778-01						2-7

Image 25

Cisco Systems A9014CFD, ASR 9014CFD manual Installation Checklist, Task Verified by Date

Contents

Text Part Number OL-23778-01 Americas HeadquartersPage N T E N T S Required Tools and Equipment Troubleshooting A-1 OL-23778-01 Revision Date Change Summary Document Revision History Audience ObjectivesOrganization Conventions Related Documentation Safety Warnings About This Guide Hardware Description Introduction Cisco ASR 901 Router Front View Cisco ASR 901 Router-Front View Cisco ASR 901 Router Ethernet Version Front View Fan Grounding Point Lug Cisco ASR 901 Router Rear View Safety Precautions Power SupplySpecification Value LEDs Pin Connector B Pin Connector a System Specifications Environmental Monitoring Temperature SensorDescription Specification Router Interface Numbering Interface Number Location Label Regulatory Compliance Safety with Equipment Safety Guidelines Safety with Electricity Preventing Electrostatic Discharge Damage Prerequisites Power Supply ConsiderationsSite Planning Site Environment Air Flow Guidelines Method of Procedure Required Tools and Equipment Unpacking and Checking the Contents of your Shipment Task Verified by Date Installation Checklist Creating a Site Log Console Port ConsiderationsConsole Port Connections Task Verified by Preparing to Install the Router Console Port Considerations OL-23778-01 Network Modules Installing the Cisco ASR 901 Mobile Wireless Router Mounting the Cisco ASR 901 Router Rack-Mounting Configuration Guidelines Mounting the Cisco ASR 901 Router in a Rack Attaching the Rack-Mounting Brackets Attaching the Cable Guides Grounding the Cisco ASR 901 Router Connecting the Chassis Ground and Power Grounding Point Stripping a Ground Wire Power Connection Compliance 6-Pin Terminal Block Wiring the DC-Input Power Source Installing SFP Modules Installing and Removing SFP Modules Removing SFP Modules Installing an SFP Module into an SFP Module Slot Connecting the Console Port Connecting Cables Console Port Types of RJ-45 Cables Connecting Gigabit Ethernet Interface Cables Connecting the Network CablesConnecting T1 and E1 Interface Cables Connecting Cables to the Bits Interface Connecting SFP CablesConnecting GPS Cables Connecting to Alarm Port Powering On the RouterConnecting to the Management Ethernet Port Dressing Router Cables Power-On Procedure Checklist for Power UpFormatting Procedures for Flash Memory Interpreting Front-Panel LEDs Displaying Contents of the Flash Memory File and Directory ProceduresCopying Files Deleting Files from the Flash Memory Displaying File Content Enter a Directory and Determine the Current Directory What to Do After Installing the Hardware OL-23778-01 Problem Solving Troubleshooting Environmental Reporting Features Troubleshooting the Power and Cooling SystemsSymptom Possible Cause Corrective Action Information Packet publication Troubleshooting Cables, and Connections Chassis LEDs Reading the LEDsCopper GE from Quad combo PHY ports contain Two Leds each System LED SFP Ethernet Interface LEDs T1/E1 Interface LEDsRJ-45 Ethernet Interface LEDs Color/State Description two LEDs for each T1/E1 port OL-23778-01 Gigabit Ethernet Connector Pinouts Cable Specifications Pin FE Signal GE Signal SFP Port Pinouts and Cable SpecificationsT1/E1 Port Pinouts Console Port Signals and Pinouts Console Port Signals and PinoutsPin Signal Name Direction Description RJ-45-to-DB-9 Terminal Adapter Console Pin Signal Name HP Pins Direction Description Identifying a Rollover Cable Terminal Adapter Device Signal RJ-45 Pin DB-25 PinConsole RJ-45-to-DB-25 Port DTE Time of Day Pinouts Bits Port PinoutsGPS Port Pinouts Pin Signal Name Description Alarm Port PinoutsManagement Ethernet Port Pinouts 10 Mhz RxDP RxDN TxDP Not connected TxDN Site Log Initials Date Numerics IN-2 IN-3 IN-4