Cisco Systems ASR 9014CFD, A9014CFD manual Bits Port Pinouts, Time of Day Pinouts, GPS Port Pinouts

Appendix B Cable Specifications

BITS Port Pinouts

BITS Port Pinouts

Table B-6list the pinouts for the BITS interface RJ-45 port on the Cisco ASR 901 router.

Table B-6	BITS Pinouts for the Cisco ASR 901 router
Pin	Signal Name	Direction	Description
1	RX ring	Input	Receive ring
2	RX tip	Input	Receive tip (T1/E1)
3	Not connected
4	TX ring	Output	Transmit ring
5	TX tip	Output/input	Transmit tip (T1/E1)
6			Not connected
7			Not connected
8			Not connected

Time of Day Pinouts

Table B-6list the pinouts for the Time of Day RJ-45 interface on the Cisco ASR 901 router.

Table B-7	Time of Day RJ45 Interface Pinout
Pin	Signal Name	Direction	Description
1			Not connected
2			Not connected
3			Not connected
4	Ground
5	Ground
6			Not connected
7	TOD_N	Output/Input	Time of Day RS422 differential input
			or output
8	TOD_P	Output/Input	Time of Day RS422 differential input
			or output

GPS Port Pinouts

The Cisco ASR 901 router has a 10Mhz and a 1PPS GPS port that allow you to configure input or output clocking with a GPS device. Table B-8summarizes the pinouts for the 10Mhz and 1PPS interfaces.

Note For pinouts related to ToD and 1PPS using the BITS interface, see Console Port Signals and Pinouts.

Cisco ASR 901 Series Aggregation Services Router Hardware Installation Guide

B-6 OL-23778-01