C H A P T E R 3

Installing the Cisco ASR 901 Mobile Wireless Router

This chapter describes how to install the Cisco ASR 901 router, and how to connect it to networks and external devices. These are the following sections:

Network Modules, page 3-1

Mounting the Cisco ASR 901 Router, page 3-2

Connecting the Chassis Ground and Power, page 3-5

Installing and Removing SFP Modules, page 3-9

Connecting Cables, page 3-11

Powering On the Router, page 3-15

Warning Only trained and qualified personnel should be allowed to install, replace, or service this equipment. Statement 1030

Warning This unit is intended for installation in restricted access areas. A restricted access area can be accessed only through the use of a special tool, lock and key, or other means of security. Statement 1017

Network Modules

You can order the Cisco ASR 901 router with the following interface modules.

T1/E1 interface module

SFP Ethernet interface module

RJ-45 Ethernet interface module

Interface modules are installed and shipped with the router; they are not field replaceable.

Cisco ASR 901 Series Aggregation Services Router Hardware Installation Guide

 

OL-23778-01

3-1

 

 

 

Page 29
Image 29
Cisco Systems ASR 9014CFD, A9014CFD manual Installing the Cisco ASR 901 Mobile Wireless Router, Network Modules