Cisco Systems CIVS-IPC-2621V manual Motion Detection Window

Chapter 3 Configuring and Managing the IP Camera

Applications Windows

Table 3-15	Mail/FTP/HTTP Window Options (continued)
Option		Description
URL Base		Enter a string to be used as the prefix in the HTTP URL. The HTTP URL is
		sent in this format:
		http://ip-address/url-base?system-provided-name-value-pairs
		where:
		• ip-addressis the IP address of the HTTP notification server,
		• url-baseis the string that you enter for this field (URL Base).
		• system-provided-name-value-pairs is the event information.
Port Number		Enter the port number that receives event notification messages on the HTTP
		notification server.
User Name		Enter the user name of the HTTP notification server.
Password		Enter the password of the HTTP notification server.
HTTP Authentication		If authentication is required on the HTTP notification server, choose an
		authentication method. Currently, MD5 Digest Authentication is the only
		available authentication method.
HTTPS		Check this check box to enable HTTPS or HTTP for event notification.
POST		Check this check box to enable using XML or query string parameters are
		for HTTP event notification messages.

Motion Detection Window

The Motion Detection window allows you to configure up to four regions in a video field. The IP camera monitors activity in each region. If activity exceeds a configured threshold in any of these regions, the IP camera generates an alert and takes the actions that are configured in the Event window. (See the “Event Window” section on page 3-31for more information.)

To display the Motion Detection window, access the configuration windows as described in the “Accessing the IP Camera Windows” section on page 2-25, click Applications, then click Motion Detection.

The Motion Detection window displays the current video from the IP camera and provides several configuration options. If you are prompted to install ActiveX controls when trying to access this window, follow the on-screen prompts to do so. ActiveX controls are required to see the video and the options.

If you change any options in the Motion Detection window, you must click Apply to save the changes.

Note In addition to moving objects, motion detection can be triggered by rapid changes in lighting conditions or by movement of the IP camera itself.

Table 3-16describes the options in the Motion Detection window.

	Cisco Video Surveillance System 2621 IP Dome User Guide
3-30	OL-24129-02