Cisco Systems CP7945G manual State

If you want to...	Then...
Dial from a call log (while	1.	Choose	> Missed Calls, Placed Calls, or Received Calls.
not on another call)	2.	Highlight a call record.
	Note If the Details softkey appears, the call is the primary entry of a
		multiparty call. See the Tips section below.
	3.	If you need to edit the displayed number, press EditDial followed by
		<< or >>. To delete the number, press EditDial followed by Delete.
		(You may need to press the more softkey to display Delete.)
	4.	Go off-hook to place the call.
Dial from a call log (while	1.	Choose	> Missed Calls, Placed Calls, or Received Calls.
connected to another call)	2.	Highlight a call record.
	Note If the Details softkey appears, the call is the primary entry of a
		multiparty call. See the Tips section below.

3.If you need to edit the displayed number, press EditDial followed by << or >>. To delete the number, press EditDial followed by Delete. (You may need to press the more softkey to display Delete.)

4.Press Dial.

5.Choose a menu item to handle the original call:

–Hold—Puts the first call on hold and dials the second.

–Transfer—Transfers the first party to the second and drops you from the call. (Press Transfer again after dialing to complete the action.)

–Conference—Creates a conference call with all parties, including you. (Press Confrn or Conference again after dialing to complete the action.)

–EndCall—Disconnects the first call and dials the second.

See if the line in the call	Look for Busy Lamp Field indicators. See Using BLF to Determine a Line
log is busy before placing	State, page 46.
a call to that line
Place a call from a URL	1.	Choose	> Missed Calls, Placed Calls, or Received Calls.
entry in a call log	2.	Highlight the URL entry that you want to dial.
(SIP phones only)
	3.	If you need to edit the entry, press EditDial.
	4.	The	icon appears to indicate that you can begin editing
		characters in the URL entry.
	5.	Press Dial.
64			OL-22332-01