Cisco Systems CP7945G manual Using a Handset, Headset, and Speakerphone, Using a Headset

Using a Handset, Headset, and Speakerphone

You can use your phone with these audio devices: a handset, headset, or speakerphone.

The phone is off-hookwhen the handset is lifted or another audio device is in use.

The phone is on-hookwhen the handset is in its cradle and other audio devices are not in use.

Using a Handset

If you want to...	Then...
Use the handset	Lift it to go off-hook; replace it in the cradle to go on-hook.
	The ringing line is selected automatically. Contact your system
	administrator for the options to select the primary line each time.
Switch to the speakerphone or	Press	or	, then hang up the handset.
headset during a call
Adjust the volume level for	Press		during a call or after invoking a dial tone.
a call	Press Save to preserve the volume level for future calls.

Using a Headset

Your phone supports four- or six-wire headset jacks for wired headsets. Cisco Unified IP Phone 7975G, 7965G, and 7945G also support wireless headsets. For information about purchasing headsets, see Headset Support, page 7.

You can use a headset with all of the controls on your phone, including and . However, if you use a wireless headset, refer to the wireless headset documentation for instructions.

If you want to...	Then...
Toggle headset mode on and off	Press	.
Switch to a handset	Lift the handset.
Adjust the volume level for a call	Press	during a call or after invoking a dial tone.
	Press Save to preserve the volume level for future calls.
Cisco Unified IP Phone Guide for Cisco Unified Communications Manager 8.5(1) (SCCP and SIP)			55