Cisco Systems CP7945G manual Transferring Calls, Message System

Models: CP7945G

1 104
Download 104 pages 41.75 Kb
Page 36
Image 36

Transferring Calls

Transfer redirects a connected call. The target is the number to which you want to transfer the call.

If you want to...

Then...

 

 

Transfer a call without

1. From an active call, press Transfer.

talking to the

2.

Enter the target number.

transfer recipient

3.

Press Transfer again to complete the transfer or EndCall to cancel.

 

 

Note If your phone has on-hook transfer enabled, complete the transfer

 

 

by hanging up.

 

 

 

Talk to the transfer

1.

From an active call, press Transfer.

recipient before transferring

2.

Enter the target number.

a call (consult transfer)

3.

Wait for the transfer recipient to answer.

 

 

4.

Press Transfer again to complete the transfer or EndCall to cancel.

 

Note If your phone has on-hook transfer enabled, complete the transfer

 

 

by hanging up.

 

 

Redirect a call to a voice

Press iDivert. For more information, see Sending a Call to a Voice

message system

Message System, page 31.

 

 

 

Tips

If on-hook transfer is enabled on your phone, you can either hang up to complete the call, or press Transfer and then hang up.

If on-hook transfer is not enabled on your phone, hanging up without pressing Transfer again places the call on hold.

You cannot use Transfer to redirect a call on hold. Press Resume to remove the call from hold before transferring it.

The Transfer feature is disabled on a Call Chaperone user’s Cisco Unified IP Phone when the calls are being chaperoned.

30

OL-22332-01

Page 36
Image 36
Cisco Systems CP7945G manual Transferring Calls, Message System