Cisco Systems CP7945G Press CFwdALL or Forward All, User Options Web Pages, Settings on the Web

If you want to...	Then...
Set up Call Forward All on	Press CFwdALL or Forward All and enter a target phone number.
your primary line
Cancel Call Forward All on	Press CFwdALL or Forward All.
your primary line
Verify that Call Forward	Look for:
All is enabled on your	• The call forward icon above your primary phone number:
primary line
	• The call forward target number in the status line.
Set up or cancel call	1. Log in to your User Options web pages. (See Accessing Your
forwarding remotely, or for a	User Options Web Pages, page 71.)
non-primary line	2. Access your call forwarding settings. (See Controlling Line
	Settings on the Web, page 77.)
	Note When call forwarding is enabled for any line other than the
	primary line, your phone does not provide you with
	confirmation that calls are being forwarded. Instead, you must
	confirm your settings in the User Options web pages.

Tips

•Enter the call forward target number exactly as you would dial it from your phone. For example, enter an access code or the area code, if necessary.

•You can forward your calls to a traditional analog phone or to another IP phone, although your system administrator may restrict the call forwarding feature to numbers within your company.

•Call forwarding is phone line specific. If a call reaches you on a line where call forwarding is not enabled, the call will ring as usual.

•Your system administrator can enable a call forward override feature that allows the person receiving your forwarded calls to reach you. With override enabled, a call placed from the target phone to your phone is not forwarded, but rings through.

•Your phone may reject your attempt to set up Call Forward All directly on the phone if the target number that you enter would create a call forwarding loop or would exceed the maximum number of links permitted in a call forwarding chain.

•When you switch an in-progress call from your mobile phone to Cisco Unified devices that share the same line (Session Handoff), the Call Forward feature is disabled on the Cisco Unified devices. The Call Forward feature returns when the call ends.

32 OL-22332-01