Send documentation comments to mdsfeedback-doc@cisco.com.
17-4
Cisco MDS 9000 Family Fabric Manager Configuration Guide
OL-6965-03, Cisco MDS SAN-OS Release 2.x
Chapter 17 PortChannel Configuration
Using the PortChannel Wizard
Figure 17-4 Dynamically Form a PortChannel
Step 8 If you did not choose to dynamically form a PortChannel, you see the third PortChannel Wizard screen
as shown in Figure 17-5.
Figure 17-5 Create a PortChannel
Step 9 Change the channel ID or description for each switch, if necessary.
Step 10 Review the attributes at the bottom of the screen, and set them if applicable.