Send documentation comments to mdsfeedback-doc@cisco.com.
3-3
Cisco MDS 9000 Family Fabric Manager Configuration Guide
OL-6965-03, Cisco MDS SAN-OS Release 2.x
Chapter 3 Fabric Manager Client
Using Fabric Manager Client
Using Fabric Manager Client
This section describes the Fabric Manager client interface, as shown in Figure 3-1.
Figure 3-1 Fabric Manager Main Window
1Menu bar—Provides access to options that are organized by menus.
2Toolbar—Provides icons that provide direct access to the most commonly used options on the
File, Tools, and Help menus.
3Information pane—Displays information about whatever option is selected in the menu tree.
4Status Bar (right side)—Shows the last entry displayed by the discovery process, and the possible
error message.
5Fabric pane—Displays a map of the network fabric, including switches, hosts, and storage. It also
provides tabs for displaying log and event data.
6Logical domains—Displays a tree of configured SAN, fabrics, VSANs and zones.
Note Fabric Manager Release 2.1(2) or later displays all fabrics under one SAN.
7Physical attributes—Displays a tree of available configuration tasks depending on the fabric,
VSAN, or zone selected above. Lists the switches and end devices in the logical selection.
8Status Bar (left side)—Shows short-term transient messages, such as the number of rows
displayed in a table.