Cisco Systems MDS 9000 Managing RMON Events, Managing RMON Alarms

Send documentation comments to mdsfeedback-doc@cisco.com.
34-15
Cisco MDS 9000 Family Fabric Manager Configuration Guide
OL-6965-03, Cisco MDS SAN-OS Release 2.x
Chapter 34 Third-Party Integration
Configuring RMON Using Threshold Manager
Step 5 Choose one of the following severity levels to assign to the alarm: Fatal, Warning, Critical, Error,
Information.
Step 6 Click Create.
Step 7 Confirm the operation to define an alarm and a log event when the system prompts you to define a
severity event.
If you do not confirm the operation, the system only defines a log event.
Step 8 Choose More > Alarms from the Threshold Manager dialog box to verify the alarm you created.
Managing RMON Events
To define customized RMON events from the Device Manager, follow these steps:
Step 1 Choose Admin > Events > Threshold Manager and click More on the Threshold Manager dialog box.
Step 2 Click the Events tab on the RMON Thresholds dialog box.
You see the RMON Events dialog box.
Step 3 Click Create to create a new event entry.
You see the Create Threshold Event Entry dialog box.
Step 4 Configure the RMON threshold event attributes by choosing the type of event (log, snmptrap, or
logandtrap).
Step 5 Click Create.
Managing RMON Alarms
To view the alarms that have already been enabled from the Device Manager, follow these steps:
Step 1 Choose Admin > Events > Threshold Manager and click More on the Threshold Manager dialog box.
Step 2 Click the Alarms tab.
You see the RMON Alarms dialog box.
Step 3 Click Create to create a customized threshold entry.
You see the Create RMON Alarms dialog box.