Cisco Systems NSS3000 Series manual Click Update

Configuring the NSS	3
Saving the NSS Configuration

STEP 4 Click Update.

STEP 5 Click Save to save the configuration settings. If you have problems saving the configuration file to the specified volume, check the volume and make sure that it is not locked.

STEP 6 If you saved the file to the USB flash device, you must unmount the USB device from the AUX-1 port before you remove it. To unmount the device, select Storage Status from the Configuration Manager window.

The Storage Status page appears.

STEP 7 Click Unmount.

STEP 8 When the AUX-1 LED on the chassis is off, you can safely remove the unmounted USB flash device from the AUX-1 port.

NSS3000 Series Network Storage System Getting Started Guide 18