Cisco Systems NSS3000 Series manual Saving the NSS Configuration

Configuring the NSS	3
Saving the NSS Configuration

stream video to the Windows camera utility program. After you run the wizard, you must map the network drive from the PC that runs the Windows utility program to the CIFS share and then set up the utility to save to the mapped network drive.

Saving the NSS Configuration

You can save a copy of the NSS configuration to use if you need to restore the settings at a later time. When you save the configuration file, it saves a date- stamped version of the current configuration settings to the specified volume on the NSS. You can choose to save the current configuration settings to a specified volume on the NSS or you can save the file to a USB flash device.

To save the current configuration:

STEP 1 If you are saving the configuration file to a USB flash device, insert a USB flash device into the AUX-1 port on the front panel of the NSS.

STEP 2 From the Manager Menu, click Admin Configuration.

The Configuration Manager page appears.

STEP 3 Select the location where the backup is saved from the Stored Configuration Location drop-down menu. To save the configuration file to a USB flash device, select the AUX-1 port as the location. You can then copy the configuration file from the USB flash device to another location on your network.

NSS3000 Series Network Storage System Getting Started Guide 17