Manuals / Cisco Systems / Computer Equipment / Network Card

Cisco Systems NSS3000 Series manual Connecting the Chassis to an Uninterruptible Power Supply

Models: NSS3000 Series

1 34

Download 34 pages 5.68 Kb

Page 12

Setting up the Hardware	2
Setting up the Hardware
Connecting the Power

Connecting the Chassis to an Uninterruptible Power Supply

To protect data against a sudden loss of power, follow these steps to connect the chassis to an Uninterruptible Power Supply (UPS).

STEP 1 Connect one end of the supplied power cable to the Power port on the

NSS3000 chassis.

STEP 2 Connect the other end of the power cable to the UPS.

STEP 3 Use a USB signal cable to connect the UPS port on the chassis to the UPS.

188914

to UPS

to UPS

Supported UPS Product Families

The NSS supports these UPS product families:

•APC Back-UPS Pro USB

•APC Back-UPS RS USB

•APC Back-UPS USB

•APC Back-UPS LS USB

•APC Back-UPS ES/CyberFort 350

•APC Smart-UPS USB

NSS3000 Series Network Storage System Getting Started Guide

8

Image 12

Cisco Systems NSS3000 Series Connecting the Chassis to an Uninterruptible Power Supply, Supported UPS Product Families

Contents

Getting Started Guide Cisco Systems, Inc. All rights reserved OL-18629-01 Contents Introduction Setting up the HardwareConfiguring the NSS Accessing the Network StorageContents Appendix B Specifications Appendix C Additional InformationChapter a NSS LEDs Appendix D Support ContactsIntroduction BenefitsAbout this Guide Approved Vendor List for DrivesSetting up the Hardware Installing the Disk DrivesSetting up the Hardware 188910 Connecting the NSS to the Network Connecting the Power Connecting the Chassis to a Standard Power OutletConnecting the Chassis to an Uninterruptible Power Supply Supported UPS Product FamiliesStarting the NSS Using the NSS3000 LCD Panel Setting up the Hardware Configuring the NSS Configuring the Computer Network SettingsSubnet Mask Logging into the Configuration Interface Http//IPaddressofNSSunitWelcome screen appears Click Run Discovery Tool Running the Quick Setup Wizards to Configure the NSS Saving the NSS Configuration Click Update Accessing the Network Storage Accessing the Storage using CIFS/SMBWindows Users Accessing the Storage through FTP NSS hostname\usernameAccessing the Storage through NFS Unix and Linux UsersAccessing Storage through CIFS/SMB Mac UsersFrom the Finder’s Go menu, click Connect to Server Accessing Storage through FTP NSS hostname\user namePower Button LED NSS LEDsSystem LED NSS LEDsLAN LED Hard Disk Drive LEDsReset Button To restore the network setting system defaultsTo reset the NSS Device Dimensions Unit WeightPower CertificationAdditional Information Support Contacts