Chapter 13 Working with Signaling Gateway Mated Pairs
Viewing Detailed Information for a Signaling Gateway Mated Pair
Field | Description |
Last Status | Date and time that the status of the signaling gateway mated pair last changed. |
Change |
|
|
|
Status Reason | Reason for the current status of the signaling gateway mated pair. |
| For a full list of possible reasons, see the stateReasons.html file: |
•If you installed SGM in the default directory, /opt, then the file is located at /opt/CSCOsgm/apache/share/htdocs/eventHelp directory.
•If you installed SGM in a different directory, then the help directory and file are located in that directory.
If the cell is too small to show all of the status reason, place the cursor over the cell to see the full status reason in a mouse over help popup.
The status reasons are listed in order of decreasing magnitude. If two or more reasons apply, the reason of greatest magnitude is displayed.
If the status reason is Unsupported Configuration, correct the configuration and enter the sgm cleandiscover command to delete all current network data and begin a clean discovery of the ITP network. If the status reason is still Unsupported Configuration, enter the sgm clean command to restore the SGM server to a “clean” state, such as would exist after a new installation of SGM. For more information on the use of these commands, see the “SGM Command Reference” section on page
Interface Information
The Interface Information
Field | Description |
|
|
QoS | Quality of service (QoS) class of the signaling gateway mated pair. |
|
|
Configured Local Port | Local port number that was configured for the signaling gateway mated |
| pair. |
|
|
Local Port | Local port number that is currently being used by the signaling gateway |
| mated pair. |
|
|
|
| Cisco Signaling Gateway Manager User Guide |
|
|
|
|
| ||
|
|
|
| |
|
|
|
