Cisco Systems OL-7861-01 manual Removing a Mylar Tab SFP Module

Removing and Installing SFP Modules

Figure 20 Mylar Tab SFP Module

63065

Removing a Mylar Tab SFP Module

To remove this type of SFP module, follow these steps:

Step 1 Attach an ESD-preventive wrist or ankle strap and follow its instructions for use.

Step 2 Disconnect and remove all interface cables from the ports; note the current connections of the cables to the ports on the line card.

Step 3 Pull the tab gently in a slightly downward direction until it disengages from the port, then pull the SFP module out. (See Figure 21.)

Figure 21 Removing a Mylar Tab SFP Module

	2
ACTIVE	CARRIER	RX PACKET

PASS	THRU
	WRAP

	3
ACTIVE	CARRIER	RX PACKET

PASS	THRU
	WRAP
	4OC48/SRP-
	SFP

84504

Step 4 Place the removed SFP module on an antistatic mat, or immediately place it in a static shielding bag if you plan to return it to the factory.

Cisco XR 12000 Series Router Ethernet Line Card Installation

OL-7861-01 29