Cisco Systems OL-7861-01 manual SODIMM Socket Retaining Clip, SODIMM with Key in Face-Up Position

Line Card Memory

Note Some line cards do not require a retaining clip.

Figure 54 SODIMM Socket Retaining Clip

75757

Caution If the retaining clip is damaged, do not use it. This can damage the SODIMM socket.

Step 4 Locate the route memory socket on the line card.

Step 5 Remove the new SODIMM from its protective antistatic bag.

Caution Grasp the edges of the SODIMM only. Do not touch the integrated circuit devices on the SODIMM, the metal traces, or fingers, along the edge of the SODIMM, or the pins in the SODIMM socket.

Step 6 Line up the SODIMM key with the key in the board socket. (See Figure 55.)

Figure 55 SODIMM with Key in Face-Up Position

	75759
		Cisco XR 12000 Series Router Ethernet Line Card Installation
74		OL-7861-01