Cisco Systems OL-7861-01 manual Link, Active, Rx Frame, 10-Port 1-Gigabit Ethernet Line Card

Figure 2 10-Port 1-Gigabit Ethernet Line Card

0	LINK	ACTIVE	RX FRAME
				1	2	3	4	5	6	7	8	9

Product Overviews

98892

10X1GE-SFP-LC

LINK ACTIVE RX FRAME

0

1

2

1 SFP module receptacle 2 Port status LEDs 3 Alphanumeric LEDs

3

Table 6 summarizes the optics and connectors used by the 10-Port 1-Gigabit Ethernet line card.

Table 6 10-Port 1-Gigabit Ethernet Line Card Optics and Connector Types

Part Number	Optics/Transmission	Maximum Distance	Connector Type
10X1GE-SFP-LC,	See Table 14 on page 48.	See Table 14 on page 48.	LC
10X1GE-SFP-LC-B

For more information, refer to the “Gigabit Ethernet SFP Modules” section on page 47 and “Cabling and Specifications” section on page 41 .

The 10-Port 1-Gigabit Ethernet line card ships with the following memory configurations installed:

•256 MB of route processor memory (Product Number MEM-LC4-256)

•512 MB of packet memory (Product Number MEM-LC4-PKT-512)—256 MB in both the receive and transmit directions

Line card memory on Engine 4 line cards (packet and route memory) is not field replaceable. For more information on memory, see the “Line Card Memory” section on page 64 .

Cisco XR 12000 Series Router Ethernet Line Card Installation

OL-7861-01 7