Cisco Systems OL-7861-01 manual Installing a Slide Tab SFP Module, Removing a Slide Tab SFP Module

Removing and Installing SFP Modules

Figure 28 Removing a Slide Tab SFP Module

	3
ACTIVE	CARRIER	RX PACKET

PASS	THRU
	WRAP
	4OC48/SRP-
	SFP

84650

Step 6 Place the removed SFP module on an antistatic mat, or immediately place it in a static shielding bag if you plan to return it to the factory.

Step 7 Protect your line card by inserting clean SFP module cage covers into the optical module cage when there is no SFP module installed.

Installing a Slide Tab SFP Module

To install this type of SFP module into a line card, follow these steps:

Step 1 Attach an ESD-preventive wrist or ankle strap and follow its instructions for use.

Step 2 Hold the SFP module with the hardware label facing up.

Caution The SFP module must be inserted with the hardware label facing up to avoiding damaging the module or the line card.

Step 3 Insert the SFP module into the appropriate slot and gently push on it until it snaps into the slot tightly. (See Figure 29.)

Cisco XR 12000 Series Router Ethernet Line Card Installation

OL-7861-01 35