Cisco Systems OL-7861-01 manual Removing an Actuator Button SFP Module

Removing and Installing SFP Modules

Figure 23 Actuator Button SFP Module

63066

Removing an Actuator Button SFP Module

To remove this type of SFP module, follow these steps:

Step 1 Attach an ESD-preventive wrist or ankle strap and follow its instructions for use.

Step 2 Disconnect and remove all interface cables from the ports; note the current connections of the cables to the ports on the line card.

Step 3 Gently press the actuator button on the front of the SFP module until it clicks and the latch mechanism activates, releasing the SFP module from the port. (See Figure 24.)

Cisco XR 12000 Series Router Ethernet Line Card Installation

OL-7861-01 31